|
|
| Further Information Applications already in use: |
- Warehouse & Storage Facilities
- Packaging Areas
- Water Treatment Plants
- Metering Houses
- Computer Rooms
- Ice & Hockey Rinks
- Printing/Silk Screen
- Defense Bases/NASA
- Underground Tunnels
- Spice Blending Mills
- Clean Rooms
- Archives/Museums
- Indoor Swimming Pools
- Health/Fitness Clubs
- Plastic Molding
- Therapeutic/Rehab Centers
- Condominiums/Apartment Pools
- Private Swimming Pools
|
- Food Processing/Storage
- Drying Rooms
- Machine/Grinding Shops
- Powder Blending/Mixing
- Hospitals
- Electronics
- Nuclear Power Plants
- Pharmaceutical Labs
- Tele-communications
- Waste Water Treatment
- Testing Labs
- Laundries
- Locker Rooms
- Hotels/Motels Spas
- YMCA/Commercial Pools
- Paper & Pulp Facilities
- Schools & Universities
- Plus Many Others
|
Principles of
Operation
Warm humid air from the structure is drawn into the cold dehumidification coil of the
dehumidifier. The temperature of the air is lowered below the dewpoint condition and water
(humidity) is collected on the dehumidification coil. During the dehumidification process
heat produced as water vapor becomes a liquid. This latent heat is then collected by the
refrigerant system along with the heat taken from the entering air stream (sensible heat).
Along with the latent heat, the energy used to operate the refrigerating compressor is
also collected as heat energy and added to the refrigerant. Latent heat and compressor
heat is then transferred by the refrigerant system to the condenser (re-heat) coil of the
dehumidifier where it is added back into the air stream. A temperature rise of
approximately 20of above the inlet air temperature can be expected. Total System Comfort Control
The DRYAIRE SYSTEM features an automatic changeover temperature control thermostat. When
the relative humidity rises in the enclosure, the de-humidistat will start the
dehumidifier. The auto-thermostat checks the room temperature. It will transfer from
heating mode to cooling mode maintaining the desired temperature automatically without
unnecessary adjustments.
Simple & Easy
Installation
Savings of up to 50% in installation time can be achieved when compared to water cooled or
desiccant type dehumidification. Design flexibility allows the DRYAIRE SYSTEM to be remote
mounted away from the controlled space with conventional supply and return air ducts. Or,
if conditions exist where the building structures will not allow ductwork, the
dehumidifier will function as a non-ducted (freeblow) system. |
| Standard Features
Include: |
- 100% Hermetically sealed compressor
- Overload protection
- Externally-equalized thermal expansion valve
- Hot gas by-pass for full efficiency
- High and low pressure protection
- Special paint coating for rust protection
- Copper tube aluminum fin coils
|
- Time delay starting
- Internal pressure relief
- Filter dryers
- Sound insulated cabinet
- Shrader valve access fittings
- Easy access filter rack
- Heavy gauge steel cabinet
- Self-lubricating blower and motor
- Brown-out protection
|
[Heatex
Flat Plate Exchangers] [Air-to-Air
Energy Recovery]
[Air Distribution] [Q-duct]
[ Refrigeration Dehumidification]
[Desiccant Dehumidification] [Fume
Exhaust] [Radiant
Heaters]
[Home] [Site
Map] [Contact] [Company
Profile]
ŠEER Products Inc.
(612) 721-4231
Fax: (612) 721-6306
email |
