|
   |
Weld-Master
Clean Air
System |
|
| Description: Smoke Removal System |
| The Weld-Master ventilation system by XeteX saves more fuel and provides cleaner
breathing air in a welding plant than conventional "Mixed Air" heaters. Welding
facilities installed with each method of smoke removal are illustrated below, to show the
difference in performance. |
| Design Considerations Welding
Shops generate a large amount of airborne pollutants in the form of gas and particulate.
The necessary indoor air system must remove both of these pollutants.
|
The Problems With Conventional Systems:
- Air is Filtered and Re-circulated
- Fuel Fired Heaters Pollute the Air
- Smokey Air is Mixed With Clean Air
- High Operating Costs
- Air is Never Really Clean
|
The Solutions:
- Air Displacement, Clean Dense Air is "Put" on the Floor
- A Natural Draft from Floor to Ceiling Results
- Smoke Rises to the Ceiling and is Exhausted
- Dirty and Clean Air Never Mix
- Necessary Amount of Ventilation Air is Drastically Reduced
- Operating Costs are Cut in Half
Respond!
 Click here to print, fill
out, and fax back for a free estimate on how XeteX Weld-Master will operate in your
building. |
|
[Heatex
Flat Plate Exchangers] [Air-to-Air
Energy Recovery]
[Air Distribution] [Q-duct]
[ Refrigeration Dehumidification]
[Desiccant Dehumidification] [Fume
Exhaust] [Radiant
Heaters]
[Home] [Site
Map] [Contact] [Company
Profile]
ŠEER Products Inc.
(612) 721-4231
Fax: (612) 721-6306
email |
